Use of Shears with a “Rolling Cut”

This article examines the advantages and disadvantages of using guillotine shears with an inclined top blade for the cross-cutting of flat-rolled products on modern plate mills. It is shown that it is necessary to use shears of an improved design. After shears with a “rolling cut,” designed by the All-Russia Scientific Research, Planning, and Design Institute of Metallurgical Machinery (VNIImetmash), were installed in the line of the 2800 plate mill at the Ural Steel combine, the institute conducted studies to optimize the parameters of the cutting operation and developed recommendations for the shears operators on how to adjust the shears to obtain a quality cut edge on the plates.     

浆砌石坝爆破拆除及监测技术

在陕西宝鸡峡引水枢纽浆砌石大坝改建过程中 ,Ⅱ坝段的全部以及Ⅵ坝段的部分须用爆破方法拆除。为了避免爆破震动对相邻的和保留的浆砌石坝体的不利影响 ,利用伸缩缝和预先开挖的沟槽隔震 ,采用了浅孔爆破分层拆除的方法 ,实施微差爆破 ,严格控制最大一段药量。爆破震动监测和声波测试的结果表明 ,保留的浆砌石坝体没有受到损伤     

基于约束优化的联想记忆模型学习算法

本文提出了一种对称互连神经元网络的学习策略,利用全局约束优化方法确定连接权。优化过程采用了梯度下降技术。这种学习算法可以保证训练样本成为系统的稳定吸引子,并且具有优化意义上的最大吸引域。本文讨论了网络的存储容量,训练样本的渐近稳定性和吸引域大小。计算机实验结果说明了学习算法的优越性。     

Use of sensitivity functions in the problem of designing a multilayer heat shield

An approach is proposed for solving the problem of designing a multilayer heat shield with a prescribed structure from the restrictions on its temperature.Tanslated from Inzhenerno-Fizicheskii Zhurnal, Vol. 61, No. 6, pp. 1014–1018, December, 1991.     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

现场双面动平衡在离心式多级叶轮风机上的应用

对离心式多级叶轮风机进行振动频谱分析，认为叶轮存在动不平衡，造成风机振动超标，采用现场双面动平奢技术消除了风机转轴动不平衡。     

Measurement of the Hardness of Thin Films

A method for evaluating the hardness of coatings with nanosize thickness is suggested. The method includes the determination of the hardness of the “coating-substrate” composition by indenting the coating and subsequent computation of the hardness with the use of the additivity rule. This requires determination of the thickness of the coating, of the hardness of the substrate, and of the indentation depth.     

Compressive deformation of semi-solid SiC_p/ZA27 composites

1　INTRODUCTIONTheapplicationofcastingSiCp/ZA2 7compositesisgreatlylimitedduetotheinhomogeneousdistribu tionofSiCpandtheporosityexistedinthematrix[1] .However,semi solidformingtechnology (SSF )e mergedintherecentyearscannotonlydecreaseore liminatetheporosityandenhancethecompactnessofthematrix ,butalsoimprovetheuniformdistributionofthereinforcementthroughtheredistributionofthereinforcementfromitsuniquecharacteristicsofmouldfilling[2 ] .Inaddition ,SSFisanearnet shapeform ingtechnology …     

基于米氏散射及夫朗和费衍射的FAM激光测粒仪

提出了综合运用夫朗和费衍射和米氏散射，即在大粒径范围内采用夫朗和费衍射理论，而在小粒径范围内采用米氏散射理论，来改善小粒径范围内的测量精度，保证激光测粒仪在整个粒径范围内的测量精度。     

Two-dimensional pentagon quasicrystal in an Al-Co-Ni-Tb alloy obtained by quenching under high static pressure

A transmission electron microscopy study of quasicrystals was carried out in Al-Co-Ni-Tb alloy which was obtained by quenching under high static pressure and a new two-dimensional pentagonal quasicrystal was discovered. An unique five-fold axis is observed in its diffraction patterns and the periodicity along the five-fold axis is 0.4 nm. Another feature of the pentagonal phase is that no extinction exists in the diffraction patterns along the direction perpendicular to the five-fold axis. A comparison of the high resolution electron microscopy images of the pentagonal phase and the decagonal quasicrystal is given. The effect of high pressure is discussed.